北京恒遠安諾科技有限公司經銷各種歐美*氣體流量計

7459-84W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

7459-95W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

7470-67W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7750-711流量計

產品描述：

These 316L Stainless Steel meters feature flange connections, all welded construction (no elastomers),
and an end to end length of 250mm. A float and tapered tube design provides longer, more linear scales.
A 4-20mA transmitter option adds to its versatility

7110W流量計

產品描述：

Description

Metering Tube

316L Stainless Steel

Internal Components

316L Stainless Steel

Hasloy?C-276

Inlet/Outlet Fittings

1/4" FNPT, Horizontal

Control valve optional

Fitting Material

316L Stainless Steel

Connection Type

1/4" FNPT

Elastomers (valve meters only)

Standard: Viton

Optional: Buna N, EPR, and Kalrez?

Case and Covers

Die Cast Aluminum

Options

Alarm

Single, Inductive Slot Sensor

Certified Calibrations

Conform to ISA RP 16.6

Scales

Can be produced in any volumetric unit

Rear Mounting Bracket

304 Stainless Steel

7105A流量計

產品描述：

Description

Metering Tube

316L Stainless Steel

Internal Components

316L Stainless Steel

Hasloy?C-276

Inlet/Outlet Fittings

1/4" FNPT, Horizontal

Control valve optional

Fitting Material

316L Stainless Steel

Connection Type

1/4" FNPT

Elastomers (valve meters only)

Standard: Viton

Optional: Buna N, EPR, and Kalrez?

Case and Covers

Die Cast Aluminum

Options

Alarm

Single, Inductive Slot Sensor

Certified Calibrations

Conform to ISA RP 16.6

Scales

Can be produced in any volumetric unit

Rear Mounting Bracket

304 Stainless Steel

7310-43A流量計

產品描述：

Description

Metering Tube

Molded Polysulfone

Internal Components

316L Stainless Steel,

Teflon / Polysulfone or Hasloy C-276?

Inlet/Outlet Fittings 

NPT, Vertical

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC 

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7310-103W流量計

產品描述：

Description

Metering Tube

Molded Polysulfone

Internal Components

316L Stainless Steel,

Teflon / Polysulfone or Hasloy C-276?

Inlet/Outlet Fittings 

NPT, Vertical

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC 

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7459-613W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

7459-96W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

7470-93W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7470-53A流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

st75氣體流量計

產品描述：

ST75 is an accurate, no moving parts, direct mass flow measurement and monitoring solution for fuel gases, air, compressed air, inert and other gas flows within industrial processes. There are two base models in the series — Model ST75, and Model ST75V which include built-in Vortab flow conditioners. They are available in six different sizes for direct, in-line installation in line sizes from 1/4 inch to 2 inch [6 mm to 51 mm]. By combining precision lithography structured platinum

RTD sensors embedded in FCI’s equal mass thermowells with microprocessor electronics and precise actual gas calibration, the ST75 achieves outstanding flow measurement performance.

Using FCI’s proven thermal dispersion technology, the ST75’sdirect mass flow measurement eliminates the cost and space of additional sensors required by inferred technologies. With its

100:1 turndown and flow ranges from 0.01 SCFM to 559 SCFM[0.01 NCMH to 950 NCMH], the ST75 measures over a wide flowrange, from low to high flow conditions. The ST75 is available in

specific calibrations for most gases including natural gas, methane and other hydrocarbon gases, as well as nitrogen, CO2, argon and all inert gases, compressed air and more.

Easy to Install, Easy to Use Model ST75 standard “T" fitting design allows for fast, simple in-line installation. Standard NPT line size selections include 1/4 inch, 1/2 inch, 3/4 inch, 1 inch, 1 1/2 inch and 2 inch. For compression fitting tube applications, selections include 1/4 inch, 1/2 inch and 1 inch. For installations with inadequate straight-run or obstructed flows that prevent a fully developed profile for accurate flow measurement with the standard ST75, Model ST75V provides the solution. FCI’s Model ST75V includes all of the features and functionality of the ST75 plus built-in Vortab flow conditioning. Vortab flow conditioners are the flow conditioning technology

proven and recommended by flow measurement experts to eliminate both swirl and velocity profile distortions to ensure accurate flow measurement. Vortab flow conditioners also are the lowest pressure loss solution of all flow conditioning techniques. FCI is the exclusive provider of Vortab flow conditioners for use with thermal mass flow meters such as the ST75V. To serve a variety of application and installation requirements the ST75 and ST75V are available in three standard configurations as shown at left. (Other display options are described in Accessory

Remote Digital Display section.) To provide convenient and easy access for wire-up and signal

isolation, the instrument’s enclosure features dual conduit ports in either NPT or M20 threads, as well as removable front and rear covers. ST75 can be ordered for DC (18 V to 36 V) or AC (85 V to 265 V) power.

8012流量傳感器

產品描述：

The paddle-wheel flow sensor for continuousflow measurement is especially designed for
use in neutral, slightly aggressive, solid freeliquids in its magnetic measuring version and
for use in liquids which let pass the infra-redsin its optic measuring version. The sensor is
made up of a fitting (Type S012) and an electronicmodule (Type SE12) connected together
with screws. The Bürkert designed fitting systemensures simple installation of the sensor
into all pipes from DN 06 to 50. It can also benstalled in fluid block systems.The sensor produces a programmable frequencypulse signal, proportional to the flow rate, which
can easily be transmitted and processed bya Bürkert remote transmitter/indicator (type
8025/8032), or a programmable switch output or a 4-20 mA signal.

8081超聲波流量傳感器

產品描述：

The Type 8081 ultrasonic flow sensor is intendedfor the measurement of water flows

which may be slightly charged with contaminants.It consists of an electronic module and

a brass fitting with a built-in measuring tube. Itenables a control loop to be established. The

electrical connection is made via an 5-pin M12 fixed connector.

The sensor features, depending on the version:

- a pulse output or

- a pulse output and a 4-20 mA current output.

Each version is available for 5 flow ranges:

- model QN 0.6 DN15: 0.06 to 20 l/min

(nominal flow rate 0.6 m3/h namely 10 l/min)

- model QN 1.5 DN15: 0.1 to 50 l/min

(nominal flow rate 1.5 m3/h namely 25 l/min)

- model QN 2.5 DN20: 0.16 to 82 l/min

(nominal flow rate 2.5 m3/h namely 41 l/min)

- model QN 3.5 DN25: 0.6 to 116 l/min

(nominal flow rate 3.5 m3/h namely 58 l/min)

- model QN 6.0 DN25: 1 to 200 l/min

(nominal flow rate 6.0 m3/h namely 100 l/min)

st50氣體流量計

產品描述：

The ST50 Flow Meter is an accurate, easy to install, nomoving parts solution for measuring and controlling air, compressedair or nitrogen flow. ST50 utilizes FCI proven thermaldispersion technology to provide direct mass flow measurement resulting in higher performance at a lower cost than orificeplates, DP, Vortex shedding and other thermal devices. Themeter installs in line sizes ranging from 2 inches to 24 inches[51 mm to 610 mm] with 1/2″ or 3/4″ NPT.ST50 uses precision, lithography structured platinum RTDsensors embedded in FCI’s equal mass small diameter, all metalthermowells. Combined with microprocessor electronics and precision calibration, the ST50 achieves excellent accuracy, fastresponse and virtually maintenance free operation.To serve a variety of application and installation requirementsthe ST50 is available in three standard configurations as shownbelow. (Other display options are described in Accessory RemoteDigital Display section.)

To provide convenient and easy access for wire-up and signalisolation, the instrument’s enclosure features dual conduitports in either NPT or M20 threads, as well as removable frontand rear covers. ST50 can be ordered for DC (18V to 36V) orAC (85V to 265V) power.The ST50 is available with four calibration and final set-upselections. Two are standard calibrations suitable for finalranging and set-up in the field and two are for factory customcalibration withfactory performed final ranging and set-up.All final set-up and flow ranges are subject to 100:1 maximumand 3:1 minimum turndowns.Two standard calibrations include one for air or nitrogenflow rates between 1.25 SFPS to 125 SFPS [0.4 NMPS to 38NMPS] in service pressures between 10 psia to 50 psia [0.7 bar(a) to 3.5 bar(a)] and one for compressed air, air or nitrogen flows between 4 SFPS to 400 SFPS [1.2 NMPS to 122 NMPS] in service pressures between 50 psia to 165 psia [3.5 bar(a) to 11.4 bar(a)]. All final user configurations for flow range, specific line size, standard volumetric or mass flow and engineering units are easily set-up in the field with a PC, PDA or FC88 programmer.Alternatively, custom factory calibration and set-up is available for air or nitrogen with flow between 0.8 SFPS to 150 SFPS [0.2 NMPS to 46 NMPS] at service pressure between 10 psia to 50 psia [0.7 bar(a)to 3.5 bar(a)] or compressed air, air or nitrogen flow between 2.5 SFPS to 400 SFPS [0.8 NMPS to 122 NMPS] with service pressure between 50 psia to 165 psia [3.5 bar(a) to 11.4 bar(a)].

st51氣體流量計

產品描述：

 The Model ST51 Flow Meter is an accurate, easy to install, no moving parts solution for measuring and controlling biogases, digester gases, methane and natural gas flow. Model ST51 utilizes FCI proven thermal dispersion technology to provide direct mass flow measurement resulting in higher performance at a lower cost than orifice plates, DP, Vortex shedding and other thermal devices.

Biogas and digester gas applications are challenged by wide flow variations and dirty, wet gas. Flow variation is experienced as these processes move from low production start-up phases to a consistent, sustainable process and by seasonal temperature change, where cold temperatures slow gas production and higher temperature accelerate gas production. While the primary composition of these gases is methane and CO2, residual H2S and wet vapor leave deposits and corrode surfaces. ST51 provides the solution to these challenges. It features a wide-turndown ratio, up to 100:1 and is highly sensitive to low flow measurement. To measure correctly in fluctuating temperatures, flow meters must include temperature compensation circuitry and it is standard in ST51. ST51 has no moving parts to foul or clog and is easily pulled from the pipe for occasional cleaning.

Model ST51 installs in line sizes ranging from 2" to 24" [51 mm to 610 mm] with 1/2" or 3/4" NPT.

The Model ST51 uses precision, lithography structured platinum RTD sensors embedded in FCI’s equal mass small diameter thermowells. Combined with microprocessor electronics and precision calibration, the Model ST51 achieves excellent accuracy, fast response and virtually maintenance free operatio

GF90氣體流量計

產品描述：

The GF Series Gas Mass Flowmeters combine FCI’s highly reliable Thermal Dispersion, no-moving-parts flow element designwith an advanced microproces or-based programmable transmitter.Performance and durability are unmatched in tough industrial applications ranging from exhaust stack gas to digester gas to hydrogen make-up gas flow metering.Reliability, Flexibility in Industrial Applications

The GF Series Mass Flowmeters are available in two models: the GF90 with an insertion flow element and the GF92 with an inline flow element. Both models feature standard 316 stainless steel,nickel braze construction. Corrosion- and abrasion-resistantalloys and all-welded construction are available for select servicein harsh process environments.FCI’s advanced constant power Thermal Dispersion technologyprovides the GF Series Mass Flowmeters with turndowns up to 1000:1,repeatability of ±0.5% reading or better, and flow rate accuracy of±1% reading plus 0.5% full scale.

The GF Insertion Model The GF90 is available for usein ducts or pipe sizes with a suggested minimum 2 inch [50 mm]nominal inside diameter. The standard flow element has a 1 inch male NPT process connection and an application specific insertion. length. Flange connections and field retractable packing gland assemblies are also available.

st98l氣體流量計

產品描述：

ST98 flow meters combine proprietary equal mass thermal dispersionflow sensing elements, precision electronics, and exacting fluidcalibrations, all packaged within rugged, industrial enclosures.The ST98 Series delivers a superior air/gas flow measurementsolution that continuously meets performance specifications in themost demanding process and plant applications with virtually noscheduled maintenance.ST98 flow meters feature FCI’s patented no-moving parts flowelement design that provides direct mass flow measurement with justa single process penetration. This saves you space and eliminatesunnecessary installation, expense, and performance degradationassociated with separate temperature and pressure sensors, anddensity calculation devices needed with inferred mass flow techniques.With no moving parts to plug or foul, ST98’s deliver extensive costsavings over alternative high maintenance technologies. The resultis an accurate and highly repeatable mass flow measurement at thelowest total installed cost. In today’s complex process control schemes,the ST98 Series provides accurate gas flow measurements essential for process consistency, quality and safe plant operation.

mt91氣體流量計

產品描述：

FCI’s MT Series Multipoint Mass Flowmeters are ideal fortoday's most challenging industrial air or gas handling applicationsand continuous emissions monitoring systems (CEMS). Insidelarge combustion or preheater systems, HVAC units, ducts orflue stacks, MT Series multipoint flowmeters measure flow withexceptional precision under variable thermodynamic conditions.They are an excellent choice for measuring mass flow almostanywhere variable conditions limit single-point flowmeter effectiveness.Harsh environments, in which temperature, vibration,abrasion and corrosion pose difficulties for other meters, are no problem for the rugged MT Series multipoint flowmeters.

Instrument accuracy is available to ± 2% of reading, with repeatability of ± 0.5%.

Key Product Performance Features

_ High accuracy -- up to 16 flow sensing points per meter.

_ Diagnoses duct temperature stratification with dynamictemperature output capability.

_ Wide temperature range from –50° to +850°F [-45° to +454°C].

_ Pressures up to 50 psig [3.4 bar(g)].

_ Continuous built-in testing and calibration adjustment preventdrift for superior repeatability.

_ Averaging filter dampens response to rapid process fluctuations.

_ RS232C serial ports for communication with field devices.

_ Choose 4 to 20 mA, 1 to 5 or 0 to 10 Vdc outputs.

_ Menu-driven control for ease of service.

_ Rack mountable with card slots for expansion andoption modules.

_ Stainless steel flow element construction; electronicsenclosure rated NEMA/CSA Type 4.

_ Simple maintenance with modular design and interchangeablecomponents.

st98氣體流量計

產品描述：

ST98 flow meters combine proprietary equal mass thermal dispersionflow sensing elements, precision electronics, and exacting fluidcalibrations, all packaged within rugged, industrial enclosures.The ST98 Series delivers a superior air/gas flow measurementsolution that continuously meets performance specifications in themost demanding process and plant applications with virtually noscheduled maintenance.ST98 flow meters feature FCI’s patented no-moving parts flowelement design that provides direct mass flow measurement with justa single process penetration. This saves you space and eliminatesunnecessary installation, expense, and performance degradationassociated with separate temperature and pressure sensors, anddensity calculation devices needed with inferred mass flow techniques.With no moving parts to plug or foul, ST98’s deliver extensive costsavings over alternative high maintenance technologies. The resultis an accurate and highly repeatable mass flow measurement at thelowest total installed cost. In today’s complex process control schemes,the ST98 Series provides accurate gas flow measurements essential for process consistency, quality and safe plant operation.

MT86氣體流量計

產品描述：

FCI’s MT Series Multipoint Mass Flowmeters are ideal fortoday's most challenging industrial air or gas handling applicationsand continuous emissions monitoring systems (CEMS). Insidelarge combustion or preheater systems, HVAC units, ducts orflue stacks, MT Series multipoint flowmeters measure flow withexceptional precision under variable thermodynamic conditions.They are an excellent choice for measuring mass flow almostanywhere variable conditions limit single-point flowmeter effectiveness.Harsh environments, in which temperature, vibration,abrasion and corrosion pose difficulties for other meters, are no problem for the rugged MT Series multipoint flowmeters.

Instrument accuracy is available to ± 2% of reading, with repeatability of ± 0.5%.

Key Product Performance Features

_ High accuracy -- up to 16 flow sensing points per meter.

_ Diagnoses duct temperature stratification with dynamictemperature output capability.

_ Wide temperature range from –50° to +850°F [-45° to +454°C].

_ Pressures up to 50 psig [3.4 bar(g)].

_ Continuous built-in testing and calibration adjustment preventdrift for superior repeatability.

_ Averaging filter dampens response to rapid process fluctuations.

_ RS232C serial ports for communication with field devices.

_ Choose 4 to 20 mA, 1 to 5 or 0 to 10 Vdc outputs.

_ Menu-driven  control for ease of service.

_ Rack  mountable with card slots for expansion andoption modules.

_ Stainless steel flow element construction; electronicsenclosure rated NEMA/CSA Type 4.

_ Simple maintenance with modular design and interchangeablecomponents.

st75v氣體流量計

產品描述：

ST75 is an accurate, no moving parts, direct mass flow measurement and monitoring solution for fuel gases, air, compressed air, inert and other gas flows within industrial processes. There are two base models in the series — Model ST75, and Model ST75V which include built-in Vortab flow conditioners. They are available in six different sizes for direct, in-line installation in line sizes from 1/4 inch to 2 inch [6 mm to 51 mm]. By combining precision lithography structured platinum

RTD sensors embedded in FCI’s equal mass thermowells with microprocessor electronics and precise actual gas calibration, the ST75 achieves outstanding flow measurement performance.

Using FCI’s proven thermal dispersion technology, the ST75’sdirect mass flow measurement eliminates the cost and space of additional sensors required by inferred technologies. With its

100:1 turndown and flow ranges from 0.01 SCFM to 559 SCFM[0.01 NCMH to 950 NCMH], the ST75 measures over a wide flowrange, from low to high flow conditions. The ST75 is available in

specific calibrations for most gases including natural gas, methane and other hydrocarbon gases, as well as nitrogen, CO2, argon and all inert gases, compressed air and more.

Easy to Install, Easy to Use Model ST75 standard “T" fitting design allows for fast, simple in-line installation. Standard NPT line size selections include 1/4 inch, 1/2 inch, 3/4 inch, 1 inch, 1 1/2 inch and 2 inch. For compression fitting tube applications, selections include 1/4 inch, 1/2 inch and 1 inch. For installations with inadequate straight-run or obstructed flows that prevent a fully developed profile for accurate flow measurement with the standard ST75, Model ST75V provides the solution. FCI’s Model ST75V includes all of the features and functionality of the ST75 plus built-in Vortab flow conditioning. Vortab flow conditioners are the flow conditioning technology

proven and recommended by flow measurement experts to eliminate both swirl and velocity profile distortions to ensure accurate flow measurement. Vortab flow conditioners also are the lowest pressure loss solution of all flow conditioning techniques. FCI is the exclusive provider of Vortab flow conditioners for use with thermal mass flow meters such as the ST75V. To serve a variety of application and installation requirements the ST75 and ST75V are available in three standard configurations as shown at left. (Other display options are described in Accessory

Remote Digital Display section.) To provide convenient and easy access for wire-up and signal

isolation, the instrument’s enclosure features dual conduit ports in either NPT or M20 threads, as well as removable front and rear covers. ST75 can be ordered for DC (18 V to 36 V) or AC (85 V to 265 V) power.

VA410管道式氣體流量計

產品描述：

st50氣體流量計

產品描述：

The ST50 Flow Meter is an accurate, easy to install, nomoving parts solution for measuring and controlling air, compressedair or nitrogen flow. ST50 utilizes FCI proven thermaldispersion technology to provide direct mass flow measurement resulting in higher performance at a lower cost than orificeplates, DP, Vortex shedding and other thermal devices. Themeter installs in line sizes ranging from 2 inches to 24 inches[51 mm to 610 mm] with 1/2″ or 3/4″ NPT.ST50 uses precision, lithography structured platinum RTDsensors embedded in FCI’s equal mass small diameter, all metalthermowells. Combined with microprocessor electronics and precision calibration, the ST50 achieves excellent accuracy, fastresponse and virtually maintenance free operation.To serve a variety of application and installation requirementsthe ST50 is available in three standard configurations as shownbelow. (Other display options are described in Accessory RemoteDigital Display section.)

To provide convenient and easy access for wire-up and signalisolation, the instrument’s enclosure features dual conduitports in either NPT or M20 threads, as well as removable frontand rear covers. ST50 can be ordered for DC (18V to 36V) orAC (85V to 265V) power.The ST50 is available with four calibration and final set-upselections. Two are standard calibrations suitable for finalranging and set-up in the field and two are for factory customcalibration withfactory performed final ranging and set-up.All final set-up and flow ranges are subject to 100:1 maximumand 3:1 minimum turndowns.Two standard calibrations include one for air or nitrogenflow rates between 1.25 SFPS to 125 SFPS [0.4 NMPS to 38NMPS] in service pressures between 10 psia to 50 psia [0.7 bar(a) to 3.5 bar(a)] and one for compressed air, air or nitrogen flows between 4 SFPS to 400 SFPS [1.2 NMPS to 122 NMPS] in service pressures between 50 psia to 165 psia [3.5 bar(a) to 11.4 bar(a)]. All final user configurations for flow range, specific line size, standard volumetric or mass flow and engineering units are easily set-up in the field with a PC, PDA or FC88 programmer.Alternatively, custom factory calibration and set-up is available for air or nitrogen with flow between 0.8 SFPS to 150 SFPS [0.2 NMPS to 46 NMPS] at service pressure between 10 psia to 50 psia [0.7 bar(a)to 3.5 bar(a)] or compressed air, air or nitrogen flow between 2.5 SFPS to 400 SFPS [0.8 NMPS to 122 NMPS] with service pressure between 50 psia to 165 psia [3.5 bar(a) to 11.4 bar(a)].

st51氣體流量計

產品描述：

 The Model ST51 Flow Meter is an accurate, easy to install, no moving parts solution for measuring and controlling biogases, digester gases, methane and natural gas flow. Model ST51 utilizes FCI proven thermal dispersion technology to provide direct mass flow measurement resulting in higher performance at a lower cost than orifice plates, DP, Vortex shedding and other thermal devices.

Biogas and digester gas applications are challenged by wide flow variations and dirty, wet gas. Flow variation is experienced as these processes move from low production start-up phases to a consistent, sustainable process and by seasonal temperature change, where cold temperatures slow gas production and higher temperature accelerate gas production. While the primary composition of these gases is methane and CO2, residual H2S and wet vapor leave deposits and corrode surfaces. ST51 provides the solution to these challenges. It features a wide-turndown ratio, up to 100:1 and is highly sensitive to low flow measurement. To measure correctly in fluctuating temperatures, flow meters must include temperature compensation circuitry and it is standard in ST51. ST51 has no moving parts to foul or clog and is easily pulled from the pipe for occasional cleaning.

Model ST51 installs in line sizes ranging from 2" to 24" [51 mm to 610 mm] with 1/2" or 3/4" NPT.

The Model ST51 uses precision, lithography structured platinum RTD sensors embedded in FCI’s equal mass small diameter thermowells. Combined with microprocessor electronics and precision calibration, the Model ST51 achieves excellent accuracy, fast response and virtually maintenance free operatio

gf92氣體流量計

產品描述：

The GF Series Gas Mass Flowmeters combine FCI’s highly reliable Thermal Dispersion, no-moving-parts flow element designwith an advanced microproces or-based programmable transmitter.Performance and durability are unmatched in tough industrial applications ranging from exhaust stack gas to digester gas to hydrogen make-up gas flow metering.Reliability, Flexibility in Industrial Applications.

The GF Series Mass Flowmeters are available in two models: the GF90 with an insertion flow element and the GF92 with an inline flow element. Both models feature standard 316 stainless steel,nickel braze construction. Corrosion- and abrasion-resistantalloys and all-welded construction are available for select servicein harsh process environments.FCI’s advanced constant power Thermal Dispersion technologyprovides the GF Series Mass Flowmeters with turndowns up to 1000:1,repeatability of ±0.5% reading or better, and flow rate accuracy of±1% reading plus 0.5% full scale.

The GF Insertion Model The GF90 is available for usein ducts or pipe sizes with a suggested minimum 2 inch [50 mm]nominal inside diameter. The standard flow element has a 1 inch male NPT process connection and an application specific insertion. length. Flange connections and field retractable packing gland assemblies are also available.

mt91氣體流量計

產品描述：

FCI’s MT Series Multipoint Mass Flowmeters are ideal fortoday's most challenging industrial air or gas handling applicationsand continuous emissions monitoring systems (CEMS). Insidelarge combustion or preheater systems, HVAC units, ducts orflue stacks, MT Series multipoint flowmeters measure flow withexceptional precision under variable thermodynamic conditions.They are an excellent choice for measuring mass flow almostanywhere variable conditions limit single-point flowmeter effectiveness.Harsh environments, in which temperature, vibration,abrasion and corrosion pose difficulties for other meters, are no problem for the rugged MT Series multipoint flowmeters.

Instrument accuracy is available to ± 2% of reading, with repeatability of ± 0.5%.

Key Product Performance Features

_ High accuracy -- up to 16 flow sensing points per meter.

_ Diagnoses duct temperature stratification with dynamictemperature output capability.

_ Wide temperature range from –50° to +850°F [-45° to +454°C].

_ Pressures up to 50 psig [3.4 bar(g)].

_ Continuous built-in testing and calibration adjustment preventdrift for superior repeatability.

_ Averaging filter dampens response to rapid process fluctuations.

_ RS232C serial ports for communication with field devices.

_ Choose 4 to 20 mA, 1 to 5 or 0 to 10 Vdc outputs.

_ Menu-driven control for ease of service.

_ Rack mountable with card slots for expansion andoption modules.

_ Stainless steel flow element construction; electronicsenclosure rated NEMA/CSA Type 4.

_ Simple maintenance with modular design and interchangeablecomponents.

st98氣體流量計

產品描述：

ST98 flow meters combine proprietary equal mass thermal dispersionflow sensing elements, precision electronics, and exacting fluidcalibrations, all packaged within rugged, industrial enclosures.The ST98 Series delivers a superior air/gas flow measurementsolution that continuously meets performance specifications in themost demanding process and plant applications with virtually noscheduled maintenance.ST98 flow meters feature FCI’s patented no-moving parts flowelement design that provides direct mass flow measurement with justa single process penetration. This saves you space and eliminatesunnecessary installation, expense, and performance degradationassociated with separate temperature and pressure sensors, anddensity calculation devices needed with inferred mass flow techniques.With no moving parts to plug or foul, ST98’s deliver extensive costsavings over alternative high maintenance technologies. The resultis an accurate and highly repeatable mass flow measurement at thelowest total installed cost. In today’s complex process control schemes,the ST98 Series provides accurate gas flow measurements essential for process consistency, quality and safe plant operation.

8710氣體流量計

產品描述：

Type 8710 controls the mass fl ow of gases through a sensor elementwhich is not in direct contact with the gas itself. The measured valueprovided by the sensor (see the description on page 2) will be comparedin the digital control electronics with the predefi ned set point accordingto the signal; if a control difference is present, the control value output tothe proportional valve will be modifi ed using a PI-control algorithm. In this way, the mass fl ow can be maintained at a fi xed value or a predefi nedprofi le can be followed, regardless of pressure variations or other changesin the system. Type 8710 can optionally be calibrated for two different gases, the user is able to switch between these two gases.The control element, a proportional valve working at low friction, guaranteesa high sensitivity and a good control characteristics of the unit.

Typical application areas are gas dosing or rather the production of gas mixtures in:

? Heat treatment,

? Metal melting treatment,

? Environmental technology,

? Material coating and

MT86氣體流量計

產品描述：

FCI’s MT Series Multipoint Mass Flowmeters are ideal fortoday's most challenging industrial air or gas handling applicationsand continuous emissions monitoring systems (CEMS). Insidelarge combustion or preheater systems, HVAC units, ducts orflue stacks, MT Series multipoint flowmeters measure flow withexceptional precision under variable thermodynamic conditions.They are an excellent choice for measuring mass flow almostanywhere variable conditions limit single-point flowmeter effectiveness.Harsh environments, in which temperature, vibration,abrasion and corrosion pose difficulties for other meters, are no problem for the rugged MT Series multipoint flowmeters.

Instrument accuracy is available to ± 2% of reading, with repeatability of ± 0.5%.

Key Product Performance Features

_ High accuracy -- up to 16 flow sensing points per meter.

_ Diagnoses duct temperature stratification with dynamictemperature output capability.

_ Wide temperature range from –50° to +850°F [-45° to +454°C].

_ Pressures up to 50 psig [3.4 bar(g)].

_ Continuous built-in testing and calibration adjustment preventdrift for superior repeatability.

_ Averaging filter dampens response to rapid process fluctuations.

_ RS232C serial ports for communication with field devices.

_ Choose 4 to 20 mA, 1 to 5 or 0 to 10 Vdc outputs.

_ Menu-driven control for ease of service.

_ Rack mountable with card slots for expansion andoption modules.

_ Stainless steel flow element construction; electronicsenclosure rated NEMA/CSA Type 4.

_ Simple maintenance with modular design and interchangeablecomponents.

st75v氣體流量計

產品描述：

ST75 is an accurate, no moving parts, direct mass flow measurement and monitoring solution for fuel gases, air, compressed air, inert and other gas flows within industrial processes. There are two base models in the series — Model ST75, and Model ST75V which include built-in Vortab flow conditioners. They are available in six different sizes for direct, in-line installation in line sizes from 1/4 inch to 2 inch [6 mm to 51 mm]. By combining precision lithography structured platinum

RTD sensors embedded in FCI’s equal mass thermowells with microprocessor electronics and precise actual gas calibration, the ST75 achieves outstanding flow measurement performance.

Using FCI’s proven thermal dispersion technology, the ST75’sdirect mass flow measurement eliminates the cost and space of additional sensors required by inferred technologies. With its

100:1 turndown and flow ranges from 0.01 SCFM to 559 SCFM[0.01 NCMH to 950 NCMH], the ST75 measures over a wide flowrange, from low to high flow conditions. The ST75 is available in

specific calibrations for most gases including natural gas, methane and other hydrocarbon gases, as well as nitrogen, CO2, argon and all inert gases, compressed air and more.

Easy to Install, Easy to Use Model ST75 standard “T" fitting design allows for fast, simple in-line installation. Standard NPT line size selections include 1/4 inch, 1/2 inch, 3/4 inch, 1 inch, 1 1/2 inch and 2 inch. For compression fitting tube applications, selections include 1/4 inch, 1/2 inch and 1 inch. For installations with inadequate straight-run or obstructed flows that prevent a fully developed profile for accurate flow measurement with the standard ST75, Model ST75V provides the solution. FCI’s Model ST75V includes all of the features and functionality of the ST75 plus built-in Vortab flow conditioning. Vortab flow conditioners are the flow conditioning technology

proven and recommended by flow measurement experts to eliminate both swirl and velocity profile distortions to ensure accurate flow measurement. Vortab flow conditioners also are the lowest pressure loss solution of all flow conditioning techniques. FCI is the exclusive provider of Vortab flow conditioners for use with thermal mass flow meters such as the ST75V. To serve a variety of application and installation requirements the ST75 and ST75V are available in three standard configurations as shown at left. (Other display options are described in Accessory

Remote Digital Display section.) To provide convenient and easy access for wire-up and signal

isolation, the instrument’s enclosure features dual conduit ports in either NPT or M20 threads, as well as removable front and rear covers. ST75 can be ordered for DC (18 V to 36 V) or AC (85 V to 265 V) power.

VA400插入式氣體流量計

VA410管道式氣體流量計

產品描述：

TDQ氣體流量計

產品描述：

典型應用:
要應用于工業管道中天然氣、煤氣、氨氣、壓縮空氣等多種氣體工況體積和標況體積流量的計量. 
·壓降小 
·測量精度高： 可達±1%。特殊校準可達±0.5%
·低流速： 可用于1.5m/s的低流速場合 
安裝簡單： 無需特殊的連接配件 
·LCD顯示 
·多種輸出： 脈沖，4～20mADC
·系列化： 通徑15，25，40，50，80，100，150mm 
·可選防爆：dⅡBT4
當測量氣體沿著TDQ氣體流量計的軸線方向流動,并沖擊渦輪葉片時,便有與流量qv　、流速V和流體密度ρ乘積成比例的力作用在葉片上,推動渦輪旋轉。在渦輪旋轉的同時,葉片周期性地切割電磁鐵產生的磁力線,改變線圈的磁通量。根據電磁感應原理,在線圈內將感應出脈動的電勢信號,此脈動信號的頻率與被測流體的流量成正比。
TDQ氣體流量計是一種精密流量測量儀表，適用于測量天然氣、煤氣、氨氣、壓縮空氣等多種氣體等。與相應的流量積算儀表配套可用于測量液體的流量和總量。廣泛用于食品、飲料、石油、化工、冶金、科研等領域的流量計量、控制系統。TDQ氣體流量計與相應的信號轉換器結合可實現流量信號的傳輸、流量和總量的顯示。還可與控制室中的二次儀表或控制器相連，實現積算、傳輸和控制功能。
產品性能參數
流量范圍1.5m/s～4000m3/h
外殼不銹鋼
轉子軸硬質合金
精度0.5％、1％
zui高工作壓力6.3 MPa
接口尺寸15，25，40，50，80，100，150mm
介質溫度-20℃～+120℃
環境溫度-20℃～+50℃
輸入電源5～24VDC
輸出信號脈沖、4～20mA
防爆dⅡBT4

SM - 6 - V流量控制器

產品描述：

Avariety of controllers is available for the SM-6 flow meter.

For intrinsically safe circuits, use the Model KFD/KFA single channel controller. This model features an alarm relay(change over contact), broken wire detection, and 3 statusindicator LEDs for power, alarm and broken wire.

Also available is Model KCD – a single channel amplifier in a compact housing with LED status indication and broken wire detection.

Technical Data: Flow Sensor

Protection class IP 67 DIN 40050

Ambient temperature -20...+70°C

Operating Bi-stable

Cable length 2m

7470-62W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7470-82A流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7470-83A流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7750-715流量計

產品描述：

These 316L Stainless Steel meters feature flange connections, all welded construction (no elastomers),
and an end to end length of 250mm. A float and tapered tube design provides longer, more linear scales.
A 4-20mA transmitter option adds to its versatility

7750-717流量計

產品描述：

These 316L Stainless Steel meters feature flange connections, all welded construction (no elastomers),
and an end to end length of 250mm. A float and tapered tube design provides longer, more linear scales.
A 4-20mA transmitter option adds to its versatility

7310-64W流量計

產品描述：

Description

Metering Tube

Molded Polysulfone

Internal Components

316L Stainless Steel,

Teflon / Polysulfone or Hasloy C-276?

Inlet/Outlet Fittings 

NPT, Vertical

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC 

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

Options

Alarm

Latching Reed Switch

Certified Calibrations

Conform to ISA RP 16.6

Scales

Can be produced in any volumetric uni

7310-44A流量計

產品描述：

Description

Metering Tube

Molded Polysulfone

Internal Components

316L Stainless Steel,

Teflon / Polysulfone or Hasloy C-276?

Inlet/Outlet Fittings 

NPT, Vertical

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC 

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7310-95A流量計

產品描述：

Description

Metering Tube

Molded Polysulfone

Internal Components

316L Stainless Steel,

Teflon / Polysulfone or Hasloy C-276?

Inlet/Outlet Fittings 

NPT, Vertical

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC 

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7459-86W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

7459-97W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

7470-51W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7470-65W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7310-53A流量計

產品描述：

Description

Metering Tube

Molded Polysulfone

Internal Components

316L Stainless Steel,

Teflon / Polysulfone or Hasloy C-276?

Inlet/Outlet Fittings 

NPT, Vertical

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC 

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7459-32W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

Elastomers

Standard: Viton

Optional: Buna N, EPR, and Kalrez?

7459-85W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

7459-98W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

7470-31A流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7470-51A流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7750-705流量計

產品描述：

These 316L Stainless Steel meters feature flange connections, all welded construction (no elastomers),
and an end to end length of 250mm. A float and tapered tube design provides longer, more linear scales.
A 4-20mA transmitter option adds to its versatility

7310-51W流量計

Description

Metering Tube

Molded Polysulfone

Internal Components

316L Stainless Steel,

Teflon / Polysulfone or Hasloy C-276?

Inlet/Outlet Fittings 

NPT, Vertical

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC 

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

Options

Alarm

Latching Reed Switch

Certified Calibrations

Conform to ISA RP 16.6

Scales

Can be produced in any volumetric uni

7310-54A流量計

產品描述：

Description

Metering Tube

Molded Polysulfone

Internal Components

316L Stainless Steel,

Teflon / Polysulfone or Hasloy C-276?

Inlet/Outlet Fittings 

NPT, Vertical

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC 

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7459-31W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

Elastomers

Standard: Viton

Optional: Buna N, EPR, and Kalrez?

7459-67W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

7459-67W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

7470-53W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7109A流量計

產品描述：

Description

Metering Tube

316L Stainless Steel

Internal Components

316L Stainless Steel

Hasloy?C-276

Inlet/Outlet Fittings

1/4" FNPT, Horizontal

Control valve optional

Fitting Material

316L Stainless Steel

Connection Type

1/4" FNPT

Elastomers (valve meters only)

Standard: Viton

Optional: Buna N, EPR, and Kalrez?

Case and Covers

Die Cast Aluminum

Options

Alarm

Single, Inductive Slot Sensor

Certified Calibrations

Conform to ISA RP 16.6

Scales

Can be produced in any volumetric unit

Rear Mounting Bracket

304 Stainless Steel

7310-53A流量計

產品描述：

Description

Metering Tube

Molded Polysulfone

Internal Components

316L Stainless Steel,

Teflon / Polysulfone or Hasloy C-276?

Inlet/Outlet Fittings 

NPT, Vertical

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC 

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7459-32W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

Elastomers

Standard: Viton

Optional: Buna N, EPR, and Kalrez?

7459-85W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

7459-98W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

7470-31A流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7470-51A流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7750-705流量計

產品描述：

These 316L Stainless Steel meters feature flange connections, all welded construction (no elastomers),
and an end to end length of 250mm. A float and tapered tube design provides longer, more linear scales.
A 4-20mA transmitter option adds to its versatility

7310-64W流量計

產品描述：

Description

Metering Tube

Molded Polysulfone

Internal Components

316L Stainless Steel,

Teflon / Polysulfone or Hasloy C-276?

Inlet/Outlet Fittings 

NPT, Vertical

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC 

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

Options

Alarm

Latching Reed Switch

Certified Calibrations

Conform to ISA RP 16.6

Scales

Can be produced in any volumetric uni

7310-44A流量計

產品描述：

Description

Metering Tube

Molded Polysulfone

Internal Components

316L Stainless Steel,

Teflon / Polysulfone or Hasloy C-276?

Inlet/Outlet Fittings 

NPT, Vertical

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC 

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7310-95A流量計

產品描述：

Description

Metering Tube

Molded Polysulfone

Internal Components

316L Stainless Steel,

Teflon / Polysulfone or Hasloy C-276?

Inlet/Outlet Fittings 

NPT, Vertical

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC 

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7459-86W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

7459-94W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

7470-61W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7470-62W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7470-82A流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7470-83A流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Optional: Hasloy C-276?

Inlet/Outlet Fittings

FNPT or Flange, Vertical or Horizontal

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC (vertical connections only)

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7750-715流量計

產品描述：

These 316L Stainless Steel meters feature flange connections, all welded construction (no elastomers),
and an end to end length of 250mm. A float and tapered tube design provides longer, more linear scales.
A 4-20mA transmitter option adds to its versatility

7750-717流量計

產品描述：

These 316L Stainless Steel meters feature flange connections, all welded construction (no elastomers),
and an end to end length of 250mm. A float and tapered tube design provides longer, more linear scales.
A 4-20mA transmitter option adds to its versatility

7106W流量計

產品描述：

Description

Metering Tube

316L Stainless Steel

Internal Components

316L Stainless Steel

Hasloy?C-276

Inlet/Outlet Fittings

1/4" FNPT, Horizontal

Control valve optional

Fitting Material

316L Stainless Steel

Connection Type

1/4" FNPT

Elastomers (valve meters only)

Standard: Viton

Optional: Buna N, EPR, and Kalrez?

Case and Covers

Die Cast Aluminum

Options

Alarm

Single, Inductive Slot Sensor

Certified Calibrations

Conform to ISA RP 16.6

Scales

Can be produced in any volumetric unit

Rear Mounting Bracket

304 Stainless Steel

7109A流量計

產品描述：

Description

Metering Tube

316L Stainless Steel

Internal Components

316L Stainless Steel

Hasloy?C-276

Inlet/Outlet Fittings

1/4" FNPT, Horizontal

Control valve optional

Fitting Material

316L Stainless Steel

Connection Type

1/4" FNPT

Elastomers (valve meters only)

Standard: Viton

Optional: Buna N, EPR, and Kalrez?

Case and Covers

Die Cast Aluminum

Options

Alarm

Single, Inductive Slot Sensor

Certified Calibrations

Conform to ISA RP 16.6

Scales

Can be produced in any volumetric unit

Rear Mounting Bracket

304 Stainless Steel

7310-53A流量計

產品描述：

Description

Metering Tube

Molded Polysulfone

Internal Components

316L Stainless Steel,

Teflon / Polysulfone or Hasloy C-276?

Inlet/Outlet Fittings 

NPT, Vertical

Fitting Material

Standard: 316L Stainless Steel

Optional: PVC 

Elastomers

Standard: Viton?

Optional: Buna N, EPR, and Kalrez?

Case and Covers

304 Stainless Steel

7459-32W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel

Elastomers

Standard: Viton

Optional: Buna N, EPR, and Kalrez?

7459-85W流量計

產品描述：

Description

Metering Tube

Borosilicate Glass

Internal Components

Standard: 316L Stainless Steel

Inlet/Outlet Fittings

NPT, Vertical

Connection:

Sizes 3 & 4: 1/2" FNPT

Size 5: 3/4" FNPT

Size 6: 1" FNPT

Size 8 & 9: 1 1/2" FNPT

Fitting Material

Standard: 316L Stainless Steel